Products catalog

Substrate : Cold Rolled Steel Complying JIS G 3141 SPCC Coated with Galfan the eutectic mixture of zinc and aluminum (95/5),complying to ISO 14788, commercial quality Nominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght : 40,000 psi or 275 Mpa (Minimum) ...

Wood or steel frames must be in one plane.Moulding must be installed using c.w.nails for wood and blind rivets for steel APO Spandrel must be installed using same fasteners On Spandrel sidelaps, the tounge and groove method shall be used. To conceal fasteners, fastening ahould be on...

Roof frames should be well achored. 2. Rafters and trusess should be straight, level and parallel to each other. 3. Regular spacing between rafters and trusses should be based on metal thickness and profile of roof to be installed. R Refer toTtable on Allowable Loads...

Note: Due to continuing product development product specifications are subject to change without prior notice Handling and Storage Panels and Accessories should be piled over wooden support at least 100mm from the ground level and with a minimum inclination of 10 degree....

Base Metal : Cold Rolled Steel Nominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum) per JISG 3302 and ASTM 446 Temper : Hard and Soft Substrate :...

APO Galfan Premium Gutters are manufactured using the best hot-dipped galvanized product that assures supperior corrosion protection and a lower life-cycle cost. Double your assurance on reliability workmanship.

Nominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght :/ Annealed = 40,000 psi or 275 Mpa (Minimum) Nominal Width : 0.813m (915), 1,080m (1220) Paint Coating System : 1. Conversion Coating 2. Primer Coat 3. Top Coat . 4.Wash Coat or Service...

Nominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum) Nominal Width : 373 mm Effective coverage : 356 mm Paint Coating System : 1. Conversion...

Nominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum) Nominal Width : 0.813m (915), 1,080m (1220) Paint Coating System : 1. Conversion Coating 2. Primer Coat...

ominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght : Full hard = 80,000 psi or 550 Mpa (Maximum) / Annealed = 40,000 psi or 275 Mpa (Minimum) Nominal Width : 1.105m Effective coverage: 1.011m Paint Coating System: 1. Conversion Coating 2....

For quality finished result installation, ensure that faces of all steel or wood purlins are in one plane and levelled . It is recommended that the laying of panels start on the opposite direction of prevailing moonsoon wind. Installed roofing panels and accessories should be cleaned from metal...

Puyat Steel's modernization and expansion project is in response to our government's call for local companies to achieve global competitiveness stature. Puyat Steel's equipment supplier, who has played a pivotal role in realizing its vision of revolutionizing the local steel industry is the world's...